Precautions for using large flow water filter elements in housing filters

The high-flow water filter element is used in the corresponding housing filter. There are several aspects that need special attention when using it, which affects the use effect and service life of the high-flow water filter element.

Relevant details of the application of high flow filter elements in housing filter:

①About the flow rate of inlet and outlet.

For the housing filter, the external inlet and outlet flow rate is the actual inlet and outlet flow rate. If its direction is different, its forward and reverse movements will also change accordingly.

②For the aperture recognition problem of the filter.

The inner and outer skeleton material of the high-flow filter element is generally polypropylene PP material, which needs to be marked in detail when it is produced, including its pore size and inner and outer skeleton material.

③Sanitize before filter application.

 There are two main ways to sterilize filters:

1. For online sterilization, first install the high-flow filter element in the housing filter, pay attention to the installation method, be sure to install it correctly, and then use the method of releasing steam to sterilize for 0.5-1 hour;

2. Put the high-flow filter element into the disinfection cabinet, and keep the temperature at 120℃ for disinfection, about half an hour.

3. Select the correct high-flow filter element so that it can play its due role in the filter. When purchasing a large-flow filter element, pay special attention to its model. If the model is different, it cannot be used. The high-flow filter element is not a universal filter. For different filters, different types of high-flow water filter elements need to be used.

4. Therefore, when purchasing a high-flow filter element, you should pay special attention to its model. It needs to be matched with the corresponding filter. The appearance is mainly reflected in the end cover. Different types of end covers will be different. In terms of performance, you should pay attention to the pressure. The pressure of the large flow filter element is different.

 The method and process of installing a large flow filter element in the housing filter:

① First of all, in the whole process of installing the high-flow filter element, try to avoid touching the filter and water filter element with your hands directly to avoid pollution;

②The fins in the housing filter are made of stainless steel orifice pressure plate to prevent the pressure from being too high when fixing the high-flow water filter element, and the pressure on the filter element is too tight, which may cause the filter element to deform when it is not in use;

③ When the housing filter is powered on or closed, be careful when turning the valve to avoid turning the valve too violently, which may cause the filter element to deform during disinfection;

④When installing the high-flow water filter element, it should be aligned with the stainless steel circular groove, and it should be installed vertically as far as possible to avoid dislocation.